View TLP781Y-TP6F_1877948.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

tlp781/tlp781f 2008-01-17 1 1 2 3 4 1 : anode 2 : cathode 3 : emitter 4 : collector toshiba photocoupler gaas ired & photo ? t ransistor tlp781,tlp781f office equipment household appliances solid state relays switching power supplies various controllers signal transmission be tween different voltage circuits the toshiba tlp781 consists of a silicone photo ? transistor optically coupled to a gallium arseni de infrared emitting diode in a four lead plastic dip (dip4) with having high isolation voltage (ac: 5kv rms (min)). ? tlp781 : 7.62mm pitch type dip4 ? tlp781f : 10.16mm pitch type dip4 ? collector-emitter voltage: 80v (min.) ? current transfer ratio: 50% (min.) rank gb: 100% (min.) ? isolation voltage: 5000v rms (min.) ? ul recognized: ul1577, file no. e67349 ? bsi approved: bs en60065:2002 approved no.8961 bs en60950-1:2006 approved no.8962 ? semko approved:en60065:2002 approved no.800514 en60950-1:2001, en60335-1:2002 approved no.800517 ? option(d4)type vde approved : din en60747-5-2 certificate no. 40021173 (note): when an en60747-5-2 approved type is needed, please designate ?option (d4)? ? construction mechanical rating 7.62mm pitch standard type 10.16mm pitch tlpxxxf type creepage distance 6.5mm(min) 8.0mm(min) clearance 6.5mm(min) 8.0mm(min) insulation thickness 0. 4mm(min) 0.4mm(min) unit in mm toshiba weight: 0.25g (typ.) unit in mm toshiba weight: 0.25g (typ.) pin configurations (top view) tlp781 tlp781f
tlp781/tlp781f 2008-01-17 2 current transfer ratio current transfer ratio (%) (i c / i f ) i f = 5ma, v ce = 5v, ta = 25c type classi? fication (note 1) min max marking of classification (none) 50 600 blank, y, y+, ye,g, g+, b, b+,bl,gb rank y 50 150 ye rank gr 100 300 gr rank bl 200 600 bl rank gb 100 600 gb rank yh 75 150 y+ rank grl 100 200 g rank grh 150 300 g+ tlp781 rank bll 200 400 b (note 1): ex. rank gb: tlp781 (gb) (note 2): application type name fo r certification test, please use standard product type name, i. e. tlp781 (gb): tlp781 absolute maximum ratings (ta = 25c) characteristic symbol rating unit forward current i f 60 ma forward current derating (ta 39c) i f / c ? 0.7 ma / c pulse forward current (note 3) i fp 1 a power dissipation p d 100 mw power dissipation derating p d / c ? 1.0 mw / c reverse voltage v r 5 v led junction temperature t j 125 c collector ? emitter voltage v ceo 80 v emitter ?collector voltage v eco 7 v collector current i c 50 ma power dissipation (s ingle circuit) p c 150 mw power dissipation derating (ta 25c)(single circuit) p c / c ? 1.5 mw / c detector junction temperature t j 125 c operating temperature range t opr ? 55 to 110 c storage temperature range t stg ? 55 to 125 c lead soldering temperature (10s) t sol 260 c total package power dissipation p t 250 mw total package power dissipation derating (ta 25c) p t / c ? 2.5 mw / c isolation voltage (note 4) bv s 5000 v rms (note): using continuously under heavy loads (e.g. the application of high temperatur e/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operat ing temperature/current/voltage, etc. ) are within the absolute maximum ratings. please design the appropriate reliability upon reviewing the toshiba semiconductor reliability handbook (?handling precautions?/?derating concept and methods?) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). (note 3): 100 s pulse, 100 hz frequency (note 4): ac, 1 min., r.h. 60%. apply voltage to led pin and detector pin together.
tlp781/tlp781f 2008-01-17 3 recommended operating conditions characteristic symbol min typ. max unit supply voltage v cc D 5 24 v forward current i f D 16 25 ma collector current i c D 1 10 ma operating temperature t opr ?25 D 85 c (note): recommended operating conditions are given as a design guideline to obtain expected performance of the device. additionally, each item is an in dependent guideline respectively. in developing designs using th is product, please confirm specified characteristics shown in this document. individual electrical char acteristics (ta = 25c) characteristic symbol test condition min typ. max unit forward voltage v f i f = 10 ma 1.0 1.15 1.3 v reverse current i r v r = 5 v D D 10 a led capacitance c t v = 0, f = 1 mhz D 30 D pf collector ?emitter breakdown voltage v (br) ceo i c = 0.5 ma 80 D D v emitter ? collector breakdown voltage v (br) eco i e = 0.1 ma 7 D D v v ce = 24 v D 0.01 0.1 a collector dark current i d (i ceo ) v ce = 24 v ta = 85c D 0.6 50 a detector capacitance (collector to emitter) c ce v = 0, f = 1 mhz D 10 D pf coupled electrical characteristics (ta = 25c) characteristic symbol test condition min typ. max unit 50 D 600 current transfer ratio i c / i f i f = 5 ma, v ce = 5 v rank gb 100 D 600 % D 60 D saturated ctr i c / i f (sat) if = 1 ma, v ce = 0.4 v rank gb 30 D D % i c = 2.4 ma, i f = 8 ma D D 0.4 D 0.2 D collector ?emitter saturation voltage v ce (sat) i c = 0.2 ma, i f = 1 ma rank gb D D 0.4 v isolation characteristics (ta = 25c) characteristic symbol test condition min typ. max unit capacitance (input to output) c s v s = 0, f = 1 mhz D 0.8 D pf isolation resistance r s v s = 500 v 110 12 10 14 D ? ac, 1 minute 5000 D D ac, 1 second, in oil D 10000 D v rms isolation voltage bv s dc, 1 minute, in oil D 10000 D vdc
tlp781/tlp781f 2008-01-17 4 switching characteristics (ta = 25c) characteristics symbol test condition min typ. max unit rise time t r D 2 D fall time t f D 3 D turn ? on time t on D 3 D turn ? off time t off v cc = 10 v, i c = 2 ma r l = 100 ? D 3 D s turn ? on time t on D 2 D storage time t s D 25 D turn ? off time t off r l = 1.9 k ? (note 5) v cc = 5 v, i f = 16 ma D 50 D s surface-mount lead form options toshiba D weight : 0.24g (typ.) toshiba D weight : 0.24g (typ.) (note 5): switching time test circuit i f v ce v cc t on 4.5v 0.5v t off t s v cc v ce i f r l unit in mm unit in mm tlp781f(lf7) tlp781(lf6)
tlp781/tlp781f 2008-01-17 5 specifications for embossed-tape packing: (tp6), (tp7) 1. applicable package package name product type dip4lf6 tlp781 dip4lf7 tlp781f 2. product naming system type of package used for shipment is denoted by a symbol suffix after a product number. the method of classification is as below. (example 1) ????? tape type ctr rank device name (example 2) ??f??? tape type ctr rank device name 3. tape dimensions 3.1 orientation of device in relation to direction of tape movement device orientation in the recesses is as shown in figure 1. figure1 device orientation 3.2 tape packing quantity:2000 devices per reel 3.3 empty device recesses are as shown in table 1. table1 empty device recesses standard remarks occurrences of 2 or more successive empty device recesses 0 within any given 40-mm section of tape, not including leader and trailer single empty device recesses 6 devices (max.) per reel not including leader and trailer 3.4 start and end of tape the start of the tape has 30 or more empty holes. the end of the tape has 50 or more empty holes. tape feed
tlp781/tlp781f 2008-01-17 6 3.5 tape specification [1] tlp781 (tp6) (1)tape material: plastic (2)dimensions: the tape dimensions are as shown in figure 2. figure 2 tape forms [2] tlp781f (tp7) (1)tape material: plastic (2)dimensions: the tape dimensions are as shown in figure 3. figure 3 tape forms 7.50.1 0.330.02 4.450.1 10.60.1 4.20.1 1.750.1 8.00.1 4.00.1 2.00.1 1.5 +0.2 -0 1.5 +0.1 -0 16.0 +0.2 -0.1 11.50.1 0.330.02 5.050.1 12.350.1 24.0 4.40.1 1.750.1 8.00.1 4.00.1 2.00.1 1.5 +0.1 -0 +0.3 -0.1 1.5 +0.25 -0
tlp781/tlp781f 2008-01-17 7 3.6 reel specification [1] tlp781 (tp6) (1)material: plastic (2)dimensions: the reel dimensions are as shown in figure 4. figure 4 reel forms [2] tlp781f (tp7) (1)material: plastic (2)dimensions: the reel dimensions are as shown in figure 5. figure 5 reel forms 4. packing one reel of photocouplers is packed in a shipping carton. 5. label indication the carton bears a label indicating the product number, t he symbol representing classification of standard, the quantity, the lot number and the toshiba company name. 6. ordering information when placing an order, please specify the product number , the ctr rank, the tape type and the quantity as shown in the following example. (example) ????? 2000pcs. quantity (must be a multiple of 2000) tape type ctr rank device name (note): the order code may be suffixed with wither a letter or a digit. please contact your nearest toshiba sales representative for more details. 16.4 23max 332 max 1021.5 13.00.5 3.60.8 1.50.5 +2.0 -0 unit: mm 330 max 1001.5 13.00.5 31max 1.90.5 4.00.3 24.4 +2.0 -0
tlp781/tlp781f 2008-01-17 8 soldering and storage 1. soldering 1.1 soldering when using a soldering iron or medium infrared ray/ho t air reflow, avoid a rise in device temperature as much as possible by observing the following conditions. 1) using solder reflow temperature profile example of lead (pb) solder temperature profile example of using lead (pb)-free solder 2) using solder flow (for lead (pb) solder, or lead (pb)-free solder) ? please preheat it at 150c between 60 and 120 seconds. ? complete soldering within 10 seconds below 260c. each pin may be heated at most once. 3) using a soldering iron complete soldering within 10 seconds below 260c, or within 3 seconds at 350c. each pin may be heated at most once. time (s) (c) 240 210 160 60 to 120s less than 30s package surface temperature 140 time (s) (c) 260 230 190 60 to 120s 30 to 50s 180 package surface temperature this profile is based on the device?s maximum heat resistance guaranteed value. set the preheat temperature/heating temperature to the optimum temperature corresponding to the solder paste type used by the customer within the described profile. this profile is based on the device?s maximum heat resistance guaranteed value. set the preheat temperature/heating temperature to the optimum temperature corresponding to the solder paste type used by the customer within the described profile.
tlp781/tlp781f 2008-01-17 9 2. storage 1) avoid storage locations where devices may be exposed to moisture or direct sunlight. 2) follow the precautions printed on the packing label of the device for transportation and storage. 3) keep the storage location temperature and humidity within a range of 5c to 35c and 45% to 75%, respectively. 4) do not store the products in locations with poiso nous gases (especially corrosive gases) or in dusty conditions. 5) store the products in locations with minimal temperature fluctuations. rapi d temperature changes during storage can cause condensation, resu lting in lead oxidation or corrosion, which will deteriorate the solderability of the leads. 6) when restoring devices after removal from their packing, use an ti-static containers. 7) do not allow loads to be applied direct ly to devices while they are in storage. 8) if devices have been stored for more than two year s under normal storage conditions, it is recommended that you check the leads for ease of soldering prior to use.
tlp781/tlp781f 2008-01-17 10 en60747 isolation characteristics types: tlp781, tlp781f type designations for ?option: (d4) ?, which are tested under en60747 requirements. ex.: tlp781 (d4-gr-lf6) d4: en60747 option gr: ctr rank name lf6: standard lead bend name note: use toshiba standard type number for safety standard application. ex. tlp781 (d4-gr-lf6) tlp781 description symbol rating unit application classification for rated mains voltage 300 v rms for rated mains voltage 600 v rms i?iv i?iii D climatic classification 55 / 115 / 21 D pollution degree 2 D maximum operating insulation voltage v iorm 890 vpk input to output test voltage, vpr = 1.5v iorm , type and sample test t p = 10s, partial discharge < 5pc v pr 1335 vpk input to output test voltage, vpr = 1.875v iorm , 100% production test t p = 1s, partial discharge < 5pc v pr 1670 vpk highest permissible overvoltage (transient overvoltage, t pr = 60s) v tr 6000 vpk safety limiting values (max. permissible ratings in case of fault) current (input current i f , p si = 0) power (output or total power dissipation) temperature i si p si t si 300 500 150 ma mw c insulation resistance, v io = 500v,ta=25 rsi 10 12
tlp781/tlp781f 2008-01-17 11 insulation related specifications 7.62mm pitch tlpxxx type 10.16mm pitch tlpxxxf type minimum creepage distance cr 6.5mm 8.0mm minimum clearance cl 6.5mm 8.0mm minimum insulation thickness ti 0.4 mm comparative tracking index cti 175 (1) if a printed circuit is incorporated, the creepa ge distance and clearance may be reduced below this value. (e.g.at a standard distance between soldering ey e centres of 7.5mm). if this is not permissible, the user shall take suitable measures. (2) this photocoupler is suitable for ?safe electric al isolation? only within the safety limit data. maintenance of the safety data shall be ensured by means of protective circuits. vde test sign: marking on product for en60747 marking on packing for en60747 marking example: tlp781, tlp781f 4 ctr rank marking lot no . device name 4: mark for option (d4) 1pin indication p
tlp781/tlp781f 2008-01-17 12 1 10 100 1000 0.00 0.40 0.80 1.20 1.60 2.00 2.40 i fp ? v fp pulse forward current i fp (ma) pulse forward voltage v fp (v) 0.1 1.0 10.0 100.0 0.40 0.60 0.80 1.00 1.20 1.40 1.60 0 20 40 60 80 100 -20 0 20 40 60 80 100 120 i f ? ta allowable forward current i f (ma) ambient temperature ta ( ) 120 p c ? ta allowable collector power dissipation p c (mw) ambient temperature ta ( ) 200 100 160 80 60 20 40 0 ? 20 0 120 80 40 i f ? v f forward current i f (ma) forward voltage v f (v) pulse width ? 10 s repetitive frequency=100hz ta = 2 5 ` -3.0 -2.6 -2.2 -1.8 -1.4 -1.0 -0.6 0 1 10 100 forward voltage temperature coefficient ? v f / ? ta ( m v / ) ? v f / ? ta ? i f forward current i f (ma) 0.1 *: the above graphs show typical characteristics.
tlp781/tlp781f 2008-01-17 13 0 10 20 30 0.0 0.2 0.4 0.6 0.8 1.0 1.2 0.01 0.10 1.00 10.00 100.00 0.1 1 10 100 1 10 100 1000 0.1 1 10 100 collector-emitter voltage v ce (v) collector current i c (ma) i c ? v ce 0 20 40 60 80 024 6810 0.0001 0.001 0.01 0.1 1 10 0 2 04 0 6 08 01 0 0 collector-emitter voltage v ce (v) collector current i c (ma) i c ? v ce i c ? i f collector current i c (ma) forward current i f (ma) ta = 25c vce = 5v vce = 0.4v i c /i f ? i f current transfer ratio i c / i f (%) ta = 25c vce = 5v vce = 0.4v i d ? ta ambient tem p erature ta ( ) collector dark current i d ( a) 50 10 20 5 if= 2 ma 30 15 50 10 20 5 if= 2 ma 30 15 forward current i f (ma) *: the above graphs show typical characteristics.
tlp781/tlp781f 2008-01-17 14 0.00 0.04 0.08 0.12 0.16 0.20 -40 -20 0 20 40 60 80 100 0 1 10 100 -40 -20 0 20 40 60 80 100 1 10 100 1000 1 10 100 ambient temperature ta ( ) collector-emitter saturation voltage v ce(sat) (v) v ce(sat) ? ta switching time ? r l switching time ( s) load resistance r l (k ) t on ta = 25c i f = 16ma v cc = 5v t o ff t s i f = 5 ma i c = 1 ma ambient temperature ta ( ) collector current i c (ma) i c ? ta v ce = 5v if= 0.5 ma 1ma 5ma 10ma 20ma 0.1 *: the above graphs show typical characteristics.
tlp781/tlp781f 2008-01-17 15 restrictions on product use ? toshiba corporation, and its subsidiaries and affiliates (collect ively ?toshiba?), reserve the right to make changes to the in formation in this document, and related hardware, software a nd systems (collectively ?product?) without notice. ? this document and any information herein may not be reproduc ed without prior written permission from toshiba. even with toshiba?s written permission, reproduc tion is permissible only if reproducti on is without alteration/omission. ? though toshiba works continually to improve product?s quality and reliability, product can malfunction or fail. customers are responsible for complying with safety standards and for prov iding adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a ma lfunction or failure of product could cause loss of human life, b odily injury or damage to property, including data loss or corruption. before creating and producing des igns and using, customers mus t also refer to and comply with (a) the latest versions of all re levant toshiba information, including without limitation, this d ocument, the specifications, the data sheets and applic ation notes for product and the precautions and conditions set forth in the ?tosh iba semiconductor reliability handbook? and (b) t he instructions for the application that product will be used with or for. custome rs are solely responsible for all aspects of t heir own product design or applications, incl uding but not limited to (a) determining th e appropriateness of the use of this product in such design or applications; (b) evaluating and det ermining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. toshiba assumes no liability for customers? product design or applications. ? product is intended for use in general el ectronics applications (e.g., computers, personal equipment, office equipment, measur ing equipment, industrial robots and home electroni cs appliances) or for specif ic applications as expre ssly stated in this document . product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality a nd/or reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or se rious public impact (?unintended use?). unintended use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic s ignaling equipment, equipment used to control combustions or explosions, safety dev ices, elevators and escalato rs, devices related to el ectric power, and equipment used in finance-related fields. do not use product for unintended use unless specifically permitted in thi s document. ? do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy product, whether in whole or in part. ? product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. ? the information contained herein is pres ented only as guidance for product use. no re sponsibility is assumed by toshiba for an y infringement of patents or any other intellectual property rights of third parties that may result from the use of product. no license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise. ? a bsent a written signed agreement, except as provid ed in the relevant terms and conditions of sale for product, and to the maximum extent allowable by law, toshiba (1) assumes no liability whatsoever, including without limitation, indirect, co nsequential, special, or incidental damages or loss, including without limitation, loss of profit s, loss of opportunities, business interruption and loss of data, and (2) disclaims any and all express or implied warranties and conditions related to sale, use of product, or information, including warranties or conditions of merchantability, fitness for a particular purpose, accuracy of information, or noninfringement. ? gaas (gallium arsenide) is used in product. gaas is harmful to humans if consumed or absorbed, whether in the form of dust or vapor. handle with care and do not break, cut, crush, grind, dissolve chemically or otherwise expose gaas in product. ? do not use or otherwise make available product or related so ftware or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or m anufacturing of nuclear, chemical , or biological weapons or missi le technology products (mass destruction w eapons). product and related software and technology may be controlled under the japanese foreign exchange and foreign trade law and the u.s. expor t administration regulations. ex port and re-export of product or related software or technology are strictly prohibited exc ept in compliance with all applicable export laws and regulations. ? please contact your toshiba sales representative for details as to environmental matters such as the rohs compatibility of pro duct. please use product in compliance with all applicable laws and regula tions that regulate the inclusion or use of controlled subs tances, including without limitation, the eu rohs directive. toshiba assumes no liability for damages or losses occurring as a result o f noncompliance with applicable laws and regulations.

▲Up To Search▲

Price & Availability of TLP781Y-TP6F

	To Download TLP781Y-TP6F Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .